ACTIVE-BOX
www.itec-audio.com
9
ACTIVE-BOX
Programming:
It is possible to choose in which order the tracks on the CD should be played. There to push the “Prog”-button
on your remote control:
Programming of an AUDIO-CD:
The display appears P-01 and right therefrom the track number. With the “Cue”- and “Rev”- button - or the
number buttons - you can set up the requested track. You verify with the “Prog”-button. And so on.
Now the display appears P-02 and the fi rst program step is saved. Continue along the described way. If you
have programmed and verifi ed all tracks push the “Play”-button to start the replay. The push of the “Stop”-but-
ton erases all programmings.
Programming of a MP3-CD:
The display appears P-01 and right therefrom two numerical pads. The fi rst one marks the folder of the
requested track and the second pad the number of the track in the chosen folder. With the “Cue”- and “Rev”-
button - or the number buttons - you choose the folder and verify with the “Prog”-button. Now you choose the
track number and verify also with the “Prog”-button.
Now the display appears P-02 and the fi rst program step is saved. Continue along the described way. If you
have programmed and verifi ed all tracks push the “Play”-button to start the replay. The push of the “Stop”-but-
ton erases all programmings.
Repeat function (Repeat):
Push the “Repeat”-button. The display appears „REPEAT TRACK“:
The current track is continually repeated.
A new push of the “Repeat”-button. The display appears „REPEAT ALL“:
The disc is played in the normal order and starts over again and again.
Push the “Repeat”-button again. The display appears „RANDOM PLAY“:
The tracks are played in a random order.
Push the “Repeat”-button again. The display appears „INTRO PLAY“:
The tracks are played for 10 seconds.
If you push the “Repeat”-button a new time, the display appears „PLAY ALL“:
The whole CD is played normal.
