ITEC SPIDERMIKE 2
10
www.itec-audio.com
TX
SPIDERMIKE 2
The Serial interface - RS 232
Used
• For connecting to control units
• As an interface for control stations or fault reporting systems
• For logging and output of data via serial data cable for short distances
The RS 232 interface is also used for the communication with the inter-
com-expansion modules. In this case a further usage of the RS 232 interface
is no longer possible.
RX
SPIDERMIKE 2
SD-Card
Each SpiderMike 2 station is equipped with a SD Card slot by default. Micro SD cards with a storage capacity
up to 2 GB can be used. On the SD card up to 256 sound
fi
les can be stored: Possible are alarm texts, safety
instructions, signal tones as well as advertising messages or jingles.
