MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
2
Dear customer!
It is the most important goal of our development endeavours to produce practice-orientated
devices that make work easier; this applies, on the one hand, to the end user who needs to
come to terms with the device, and, on the other hand, to the engineer and technician who
install the product and set its functions according to the customer’s requirements. Many
years of experience in the field of sound reinforcement installations have taught us the main
requirement: a multi-functional device allowing all kinds of signal adjustments to the
technician and offering an easy-to-use control surface to the person running the device.
The
ITEC-MULTIMIX 8/4 digital
fulfils this requirement to perfection. With his PC, the
technician can easily configurate the device as requested and implement a wide variety of
sound effects without using additional devices. The end user receives an easy-to-grasp and
easy-to-use sound system. Adjustments can be made only within the predetermined limits,
thus eliminating operating mistakes to a large extent.
The configuration software
ITEC-MixDesign
is easy to survey and understand, and can
consequently be operated effortlessly by anybody.
You can store up to 15 different complete configurations in the Multi-Mix’s flash and switch
(load) them externally according to the occasion.
In contrast to comparable products, the
ITEC-MULTIMIX 8/4
is an analogue mixer in its
paths (with the exception of the optional DSP output module)! However, it is fully digitally
controlled. The processors control and adjust the VCAs, measure level and transmitter, and
switch the signals.
The analogue basic concept is the decisive factor for the extraordinary quality, particularly in
respect to signal to noise ratios, dynamics, and the distortion factor of small signals.
Please pay attention to the installation and configuration instructions in this manual of the
ITEC-MULTIMIX 8/4 digital
, so that you can make the most of this device.
Your ITEC acoustics team
