MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
www.itec-audio.com
MULTISPLIT / PA-CONTROL / ZONE-MIX 4/8 DIGITAL
Technical specifications
GENERAL
Frequency response
20 Hz – 20 kHz/ –3 dB
Harmonic distortion
< 0.005 %
Overall dynamics
103 dB (96 dB with DSP module)
POWER SUPPLY
External switched-mode power supply unit
Input
115 – 230 V AC
Output
+12 V, –12 V, +5/20 W
INPUTS
4 × symmetrical
Max. gain
User-definable
from –20 dB to +60 dB
Phantom voltage
+12 V
Input impedance
6.6 k
Ω
OUTPUTS
8 × symmetrical
Max. output level
+20 dB (+10 dB with DSP module)
Output impedance
Symmetrical 300
Ω
, unsymmetrical 150
Ω
DIMENSIONS (w × d × h) mm
482 (431) × 180 × 44 mm; 19” 1 HU
WEIGHT
kg
2.40
DSP PLUG-IN MODULE (2 off. possible)
24 bit/96 kHz
4 inputs, 4 outputs
General
4×4 matrix per module
PER INPUT
9-band fully-parametric equalizer ± 15 dB
Medium frequency
User-definable
from 20 Hz to 20 kHz
Filter quality
User-definable
from 0.1 to 70
PER OUTPUT
Delay: 0.023 – 500 ms/bandpass filter: 1st – 4th order
LAN MODULE
INTERFACE
Ethernet 10Base-T or 100 Base-TX (auto-sensing, full/half duplex)
PROTOCOLS
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, HTTP Internet Web
Server
SPLITDESIGN SOFTWARE
You can download the current version of our software from the following address:
http://itec-audio.com/download/splitter/splittersetup.exe
If you have any questions, please contact us at
office@itec-audio.com
or
http://www.itec-audio.com/
ITEC Tontechnik und Industrieelektronik GesmbH,
A-8200 Lassnitzthal 300, Austria, Europe
Tel.: +43 (0)3133 37800, office@itec-audio.com, www.itec-audio.com
16
