POWERMIX 6/3 DIGITAL
www.itec-audio.com
POWERMIX 3/6 DIGITAL
12
6. Connecting to External Devices
6.1 Playback
MC cassette decks, CD players, MP3 players etc, can be connected to the “Line-In”
sockets at the connection panel (see also the figure in chapter 6).
The volume adjustment is done via the fader labeled “LINE” on the display in mixer
mode.
For bass and treble adjustments, press the note symbol (lower left of the display) and
then tap on the modifier buttons.
The tone control only affects the Line input, all other inputs (like microphones) remain
unchanged as they are optimized at the factory. Changing sound settings on
microphone inputs is possible using the software “Powerdesign” and a PC.
6.2 Recording
Connect your recording device to the Line-Out socket at the front panel. All of the
inputs will be mixed according to the adjusted volume settings and sent to this output
socket.
On devices labeled with „
i
“ this socket are on the rear panel.
6.3 Connecting PA-systems
Connect external P.A. systems using a standard XLR cable to the socket labeled “OUT 2” or
“OUT 3” (balanced line-level output).
The signals on this outputs depends on the configured routing and EQ settings.
This settings are defined during the installation of the device by the audio engineer.
Summary of Contents for POWERMIX 6/3 DIGITAL
Page 1: ......
