POWERMIX 6/3 DIGITAL
www.itec-audio.com
POWERMIX 3/6 DIGITAL
8
4. Operation instructions
Important notice:
„ITEC POWERMIX 6/3 digital“ is a universal device. Features are
configured with the PC Software “ITEC_POWERDESIGN” before start-up.
Therefore the following figures are examples of a configuration.
Each device has its individual configuration and the display views and features of
your device can differ from the described ones.
Power on the device:
Bring Main switch in position “ I “.
On devices with integrated battery pack press the „Master-Volume“-button.
After switching on the device the following screen appears on the display:
Fig. 5 Example of a selection menu
If you want to work with the setting, which was used last, then press ”Last setting”.
That is the correct selection, if your device were already configured well before
switching off or an interruption.
The second menu entry is the configuration “Standard setting” (Name could be
modified ). This is mostly the Default configuration which guarantee a well prepared
operation.
This setting is usually a good starting position for your individual volume tuning.
After this two menu entries there are up to three further entries to select other
configurations. Keep the used configuration names as characteristically as possible
for your type of scenario.
Depending on your configuration, the device
- waits for an user input
- starts after seconds with configuration:
„Last setting“
...........................................
Summary of Contents for POWERMIX 6/3 DIGITAL
Page 1: ......
