STATus:OPERation:NTRansition <NR1>
Sets the value of the NTR (Negative-Transition) registers. These registers serve
as a polarity filter between the Operation Condition and Operation Event regis-
ters. When a bit in the NTR register is set to 1, then a 1-to-0 transition of the cor-
responding bit in the Operation Condition register causes that bit in the
Operation Event register to be set.
STATus:PRESet
sets all bits in the PTR
registers and clears all bits in the NTR registers.
•
If the same bits in both NTR and PTR registers are set to 1, then any transi-
tion of that bit at the Operation Condition register sets the corresponding bit
in the Operation Event register.
•
If the same bits in both NTR and PTR registers are set to 0, then no transi-
tion of that bit at the Operation Condition register can set the corresponding
bit in the Operation Event register.
•
The value returned is the binary-weighted sum of all enabled bits in the
register.
Group
STATus
Syntax
STATus:OPERation:NTRansition <NR1>
Arguments
<NR1>
A decimal value corresponding to the binary weighted sum of the register's bits.
Setting range: 0 to 65535.
Default Value
0
Example
Enable bit 3 and 4 in the NTR register:
STATus:OPERation:NTRansition 24
Query Syntax
STATus:OPERation:NTRansition?
Copyright © Itech Electronic Co., Ltd.
84
