Syntax
ARB:UDEFined:LEVel <NR1>,<NRf+>
Arguments
•
<NR1>
Used to specify which step of the custom waveform, setting range: 1 to 200.
•
<NRf+>
MIN|MAX|<value>
Used to specify the voltage/current/power/resistance value of the present
step. Setting range: MIN to MAX.
Example
ARB:UDEFined:LEVel 2,10
Query Syntax
ARB:UDEFined:LEVel? <NR1>
Query by specifying a step number to return the amplitude corresponding to the
step in the LIST waveform.
Returns
<NRf+>
15.4 ARB:UDEFined:DWELl <NR1>,<NRf+>
This command is used to set the time width corresponding to the
X
step of the
user-defined waveform.
Group
ARB
Syntax
ARB:UDEFined:DWELl <NR1>,<NRf+>
Arguments
•
<NR1>
Copyright © Itech Electronic Co., Ltd.
158