Quick
Start
Copyright ©ITECH Electronic Co., Ltd.
5
Chapter2 Quick Start
This chapter will introduce power-on check steps of IT8912E to ensure normal
start-up and usage under initialization status of the load. Besides, to facilitate
usage, this part also displays the functions of front board, rear board and
keyboard keys as well as display functions of VFD (Vacuum Fluorescent
Display) to a quick view of load appearance, structure and key usage functions
before operation.
2.1 Brief Introduction
IT8912E is a single-input programmable DC electronic load. Built in with RS232
and USB communication interfaces, this series of programmable DC electronic
load provides a multi-purpose solution to meet different design and test
requirements.
This Series delivers special functions and advantages at international level,
including:
⚫
High-visibility vacuum fluorescent display (VFD)
⚫
CC dynamic mode: up to 20KHz
⚫
Voltage measurement dissolution rate: up to 10 mV Current 0.01 mA (10
uA)
⚫
Voltage and current measurement speed: up to 50 KHz
⚫
CC
、
CV+CC
、
CR
、
CW and CR-LED operating modes
⚫
Unique CR-LED mode for PWM-LED driver test
⚫
Ipp/Imax Measure function for LED driver pulsating current and inrush
current test.
⚫
Easy programmable parameter setting, applicable for simulating LED lights
with different characteristics
⚫
Adjustable frequency, duty cycle, PWM dimming output
⚫
Pressure drop at compensation line in remote measure
⚫
OCP test, OPP test
⚫
Battery test function
、
Auto test function
、
Short-circuit function
、
Dynamic test
function
⚫
Memory capacity: 100 groups
⚫
Portable and robust enclosure equipped with skid resistant foot stand
⚫
Intelligent fan control
⚫
Rotary coding switch for easy and quick operation
⚫
Built-in Buzzer, for warning
⚫
Outage backup memory
⚫
Built-in USB and RS232 interface with VISA/USBTMC/SCPI protocol
support
Model
Voltage
Current
Power
IT8912E
(G)
500V
15A
300W
