24
Note
The timer function can be interrupted at any time by
pressing the low, high or automatic mode button.
After the timer has elapsed, the unit will return to the last
mode selected before the timer was switched on, unless
this is the high mode. In this case, the unit switches to
low or automatic mode, whichever is selected last.
●
Auto-night
stand. The
Auto-Night
setting ensures
that the minimum ventilation setting is increased so
that sufficient ventilation is also provided at night.
You can use the
Auto-Night setting
when you go to
bed in the evening. Make sure that the window
grilles are open when using this mode.
To switch on the
Auto-Night
position, press the
Auto-
button
twice
on the wireless control switch or
controllable sensor. The
Auto-Night
setting cannot be
set using the wired three-position switch.
Note
If several controls are used, it may happen that the
ventilation position on the wired control switch does
not correspond to the current ventilation position
because the ventilation unit has been set to a
different position with a different control or sensor.
ä Attention
!
The
Auto-Night
mode is only available when one
CO2
sensor
is used. If several
CO2
sensors are used, the
ventilation in the bedrooms is automatically adjusted
and the
Auto-Night mode is
not required.
ä Attention
!
The
Auto-Night
mode does not switch off
automatically after a certain period of time. In the
morning you have to switch on Auto
mode
(or
another mode) yourself.
Summary of Contents for 03-00398
Page 1: ...Installation use Itho Daalderop CVE S ECO D...
Page 2: ...Original document...
Page 12: ...12...
Page 22: ...22 ithodaalderop 4 Operation 1 2 3 Q 0 4 5 6 0 J 000 S...
