- 9 -
INTELLIGENT CLEANER
OPERATING MANUAL
1. Turn off the power switch; turn the Cleaner upside down on a flat surface.
2. Take the Vacuum Inlet Lid out as per following drawing:
3. Clean the Vacuum Inlet Lid and the fan-shaped mechanism to ensure good
ventilation.
4 .Guide the hinge tabs on the Vacuum Inlet Lid back into their holes carefully.
Method for replacement of side brush
Bottom
Fig. 1
Fig. 2
1. Remove the two screws as per the Fig.1.
2. Turn the side brush to the extent that the screwdriver can be inserted as per the
Fig.2, loosen the screw, take off the old brush and replace with new one.
3. Install the side brush and bottom housing in reverse order.
The side brush is consumable. See the following picture for the replacement method.
Clean the vacuum inlet lid
