- 4 -
INTELLIGENT CLEANER
OPERATING MANUAL
After the introduction of the Intelligent Cleaner,
please note the following operating procedures:
The Cleaner can make repeated screw type cleaning within the
scope of 3 feet of diameter, focusing to clean a spot for 4 minutes. It’s
applicable for cleaning the room where it is dirty at partial places.
The Cleaner will automatically clean the room for 30 minutes. The
mode is applicable for cleaning a small room.
The Cleaner won’t stop running until complete consumption of is the
complete consumption of its power. The maximum working is
60 minutes.
When wrong start button is pressed, the other start switch needs to be pressed
twice before cleaning.
4.
5. The max working time for the Cleaner is about 45-60 minutes, which can meet the
requirements for cleaning a normal room. If the battery power is about to run out, the
battery life indicator will become red, and it will stop working. Charging of battery is
needed.
Please ensure the battery is fully charged before starting the Cleaner.
Please tidy unfixed articles on the floor before using the Cleaner, and keep it from the
edge of the carpet and power lines, etc.
Turn on its main power start button, there are three start buttons: Spot, Clean and
Max, representing three different cleaning modes.
1.
2.
3.
A. Spot mode
B. Clean mode
C. Max mode
