background image

a.  Open both Lid Covers and unlock the two latches (Picture 2) inside the two sides of Lid 

Unit to remove Lid Unit. Open the cover of the battery compartment located on the 

underside (Picture 2) and insert four “D” size batteries according to the mark of “positive 

and negative poles”. Close the battery cover and put Lid Unit onto the Can Body 

(Picture 1).

b.  To lock Lid Unit on Can Body, open both Lid Covers and lock the two latches (Picture 2).
c.  Turn on the power switch on the back of Lid Unit (Picture 4). A red indicator light will 

turn on for 3 seconds. It will then flash once every three seconds to indicate the lid is in 

standby mode.

d.  Place your hand or any object within 6 inches of the Infrared Sensor on the front of Lid 

Unit to open lid.  When it detects something in the Sensor Zone, VisioSense™ Indicator 

light will appear solid green and lid will remain open. When VisioSense does not detect 

anything in the Sensor Zone, the light will blink red rapidly to indicate that the lid will 

close in 5 seconds.  

e.  If you press the open button (manual operation), the lid will open and remain open for 

5 minutes before closing automatically - unless you press the close button. The Lid will 

then return to automatic mode.

Operating 

Instructions

Reviews: