background image

1.  Turn the power switch to “Off” mode, remove battery or unplug AC power adapter, then 

rub and wipe clean the sensor area with a soft damp cloth and dry it immediately with a 

soft dry cloth. Re-insert batteries or plug in AC adapter (DO NOT USE battery and AC 

adapter at the same time). 

2.  Place trash can in an open area where nothing is blocking or within 10 inches of the 

sensor eye. Make sure no sunlight or spotlight shines on the sensor. Turn on the power 

and try opening lid again. 

3.  If trash can is still not working correctly, remove the batteries or unplug AC adapter. Let 

trash can sit for at least 2 hours to reset. Try opening lid after reset. 

If your trash can is still not working after trying these troubleshooting steps, please 

contact us through www.itouchless.com/contacts/ for warranty service.

Problem

Solution

1. The trash can is brand 

new, and only works 

occasionally

2. The lid stays open or lid 

opens and closes 

continuously 

3. Grinding noise when the 

lid opens/closes

4. The lid does not 

open/close 

5. I wave my hand over the 

sensor eye, but the lid does 

not open

Peel off the thin, transparent protector/sticker on top of the sensor eye. 

If the lid still doesn’t work regularly, try a new set of batteries. Then 

follow the 

General Troubleshooting Steps

.

The sensor eye may be affected by dirt, stain, dust, moisture or reflection. 

Move the trash can to a different location or turn the trash can slightly so 

that the sensor faces another direction, and follow the 

General 

Troubleshooting Steps

.

This can be caused by broken gears or lid hinge. 

•  Check for damage on the hinges that connect to the lid 

•  Follow the 

General Troubleshooting Steps

•  Visit www.itouchless.com to order a new lid unit 

•  Contact us at 1-844-660-7978 for warranty service

If you are using Batteries: 

•  Ensure batteries are inserted correctly and close the battery cover 

firmly 

•  Turn power switch to “ON" position to see if the indication light is 

visible 

If you are using AC Power Adapter: 

•  Unplug the adapter and insert new alkaline batteries to see if the lid 

works on battery 

•  If the lid works with batteries, the AC adapter may be broken

It is not a motion sensor. Hold your hand or object steadily (do not wave 

your hand) within 4-6 inches over sensor eye for it to detect and open.

6. Why is the indicator light 

flashing in yellow/amber 

color?

The battery power is low. Replace all batteries with a new set of alkaline 

batteries. Do not use rechargeable batteries or old batteries.

Important: Do not use batteries 

and the AC power adapter at the 

same time. It can only be 

powered by one source at a time.

General 

Trouble-

shooting 

Steps

STEP 

Œ

Put garbage 

bag inside 

the trash 

can.

STEP 



Lift up both ends of 

the retainer ring and 

wrap the top of the 

bag over them.

STEP 

Ž

Set the 

retainer ring 

down to 

secure bag.

How To Use 

The Smart 

Retainer 

Ring

Trouble-

shooting

Reviews: