Setting Up the EEI Prover
1. Log on to the EEI prover application.
2. Clamp the Intelis Gas Meter to the EEI prover.
3. Select the
Meter
tab and choose
ITRON
from the
Manuf
drop-down list.
Important!
If ITRON is not in the Manuf. drop-down list, contact EEI Prover
Systems for help in adding ITRON to your EEI Systems Prover.
4. Select
Intelis 250
,
Intelis 250 TC
, or the name for the Intelis Gas Meter designated by your
company from the Type drop-down list.
Important!
If the correct Intelis Gas Meter type is not in the Type drop-down list,
contact EEI Prover Systems for help adding the correct meter type to your EEI
Systems Prover.
5. Click the
Options
tab.
6. The Meter Information > Test Options window opens.
7. Select
Eye
for the Test Options Sensor.
08 July 2020
815-0154-00 REV 000
Itron, Inc. Page 52 of 66
Intelis Gas Meter Proving and Setup Guide
6 Proving the Intelis Gas Meter Using the Energy Economics (EEI)
Proving System
