Accessing Files on a CompactFlash card
Fitting a CompactFlash card
CAUTION
The Operating System (OS) resides on the CompactFlash card provided with your
handheld computer. Removing or replacing this CompactFlash card will result in loss of the OS.
To install a CompactFlash card:
1. Back up your data.
2. Remove external power and switch off your handheld computer.
3. Remove the battery (See
Battery Replacement
).
4. Remove the CompactFlash card stop.
5. Carefully insert the CompactFlash card into the socket, label side up.
6. Refit the battery and perform a
hard reset.
NOTE
you must also perform a hard reset after changing one CompactFlash card for another or to
reload the OS.
See Also
About CompactFlash cards
Using CompactFlash cards
Accessing Files on a CompactFlash card
Accessing files on a CompactFlash card
Select
My Computer
>
System
The screen displays a list of the files stored on the CompactFlash card.
See Also
About CompactFlash cards
Using CompactFlash cards
Fitting a CompactFlash card
Peripherals
CAUTION
Connect only approved cables and peripherals to your handheld computer.
To connect a peripheral via one of the COM ports:
1. Switch off both the handheld computer and the peripheral.
2. Install the peripheral to the cable (if detached).
3. Install the peripheral cable to the handheld computer.
4. Switch on both the handheld computer and the peripheral.
NOTE
If the peripheral must connect to COM1 (left port) and you wish to operate the handheld
Page 11 of 17
Handheld Computer Help
05/05/2004
file://C:\Documents%20and%20Settings\jonathan\Local%20Settings\Temp\Handheld%2...
