background image

computer from an external power unit, you may switch the charging cable from COM1 to COM4 (right 
port) if COM4 is a 26-pin configured port. 

To connect a peripheral via the infrared (IR) COM port:  

1. Ensure that the IR window at the bottom of the unit is pointing at the peripheral's IR port and that 

the units are separated by at least 15cm (6 inches).  

2. If the peripheral has a protective cap covering its IR port, remove it.  

3. If necessary, switch the peripheral off then on again, to instigate communications.  

If you have difficulties, try a slightly larger or smaller separation between the handheld computer and 
the peripheral and start again. 

 

Using Microsoft ActiveSync

 

ActiveSync is a Microsoft utility program that allows you to share and update information between your 

handheld computer and a PC running Microsoft Windows. 

The handheld computer has the following four connection options available, depending on the 
capabilities of your PC: 

z

Serial port (COM1 port only)  

z

USB port (COM1 port only)  

z

Wireless Infrared port  

z

Ethernet - requires setup of a serial partnership before use 

The necessary cables and software are provided with the handheld computer. 

To use Microsoft ActiveSync to connect to another PC: 

1. Download and install the latest version of ActiveSync software to your desktop PC from 

http://www.itronix.com/Q-200ActiveSync.  

Once ActiveSync is installed on the PC, an icon will appear in the system tray.  

2. Open ActiveSync on the desktop and make sure the connection method you want to use is 

enabled.  

3. Attach the appropriate cable or line up the IR ports on both the handheld computer and desktop 

PC.  

4. Turn on the handheld computer. ActiveSync should automatically begin the connection process.  

When a connection is established the handheld computer chimes and the ActiveSync window appears on 
the PC. 

NOTES

 

z

If you have trouble connecting, make sure the 

PC connection setting

 on the handheld computer 

matches the the setting on the desktop PC. The handheld computer is set to USB by default.  

z

For information about using Microsoft ActiveSync, please refer to the program's online Help, or 

the Microsoft ActiveSync product website.

Page 12 of 17

Handheld Computer Help

05/05/2004

file://C:\Documents%20and%20Settings\jonathan\Local%20Settings\Temp\Handheld%2...

Summary of Contents for GoBook Q-200
















Reviews: