ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · info@ek.plus · www.ek.plus
CM COMPACT 8S4
USER MANUAL
Information window on each MUX output current:
Four bars are displayed corresponding to each MUX output. The green line indicates the percentage of
the channel occupied.
The
"
Total bitrate
"
or bit rate, indicates the total current being transmitted. It should not exceed 100Mb/s.
It should not exceed 80% of the current, unless for services with constant current.
Advanced configuration:
LCN
Function:
The transmodulator enables tagging the Transport Streams of information so that the TV programs are
displayed in order on the TV set, in its program guide as specified from the headend. In this way, all TV
sets with the LCN function available will have the same content in each program number on the TV set.
Whilst this function is useful for hotels or cable operators, as it avoids manual reordering of the programs
on each TV set, tuning of each TV set is required. To carry out the program number assignment, simply
double-click on the LCN column of the program to be modified and apply the number of the desired
position. Example:
Configuration
of
SID
and
NSID
parameters:
The transmodulators enables a
“
remapping
”
of the SID fields. This functionality will enable changing the
content of a program on the TV set, leaving that program on the same output channel of the headend
module, without requiring to retune the TV set. To do this, it is necessary to activate the new program
to be transmitted in the same NSID where the previous one was being broadcast, by double clicking on
the NSID column of the program to be modified. Example:
