EN
•
Press
/ to access the output channel menu / attenuation / program ID
•
Press
+ / to set the output channel [5…12 + 21…69]
•
Press
+ / to set the desired attenuation [0…15dB]
•
Press
+ / to modify the Program Id.
•
Press
while connecting the power supply Factory default values. “rs” will
appear on the display.
•
For advanced settings, download the SW “
EK_MDHDSoft
” from the website:
www.ekselansbyits.com
and connect the modulator to the computer by using a
Type A / Type B USB cable.
•
Note: In case of using more than one modulator for the same receiver or TV set, it
is necessary to modify the “Program ID” so that they have different values.
PSU connected
Detected HDMI source
