VMS User’s Guide: PMM Utility
7
2.2.2
Starting the PMM Utility Program
a.
To open the PMM operation screen, perform one of the following:
Select
Start
Æ
Run
Æ
PMM – Personal Mailbox Management
Æ
PMM.
Double-click the PMM shortcut on your desktop (
).
b.
Click
OK
to view your mailbox settings.
c.
Enter your password (default = 1234) and click
OK
. The main PMM screen appears (if not, refer to the note
below).
Every time the PMM program starts, the Read Parameters action is
automatically performed for the mailbox number that was defined
during the installation. You are not able to read parameters from a
different mailbox.
A message box may prompt you to “Work Off-Line” due to any of the
following cases:
1. The defined mailbox does not exist. Contact the system
administrator for help.
2.
An incorrect password has been entered 3 times. Use the off-line
state to check if your mailbox number is correct. The system
administrator can reset your mailbox password.
3.
There is a communication failure and the PMM failed to read the
data. Check with your system administrator if there is a
communication failure.
