the maximum time that reaching to the order temperature takes Modify
Arrows up/down OK
3. Sp minimum time
The minimum time measures the minimum time that reaching to the order
temperature takes Modify Arrows up/down OK
4. Manufacturing time
The manufacturing time will control the manufacturing time of the
machine since it reaches the order temperature up to the removal
commencement. The controller will recalculate this time in function of the
temperature of the environment and the water. Modify Arrows up/down OK
5. Start-up time
The start-up time indicates the time that the machine must wait
until starting up the compressor, fan, pump and other outlets. Modify Arrows
up/down OK
6. Removal time
The removal time will indicate the seconds that we want the removal to last.
The controller will recalculate this time in function of the temperature of the
environment and the water. Modify Arrows up/down OK
7. By default
This option will return all the parameters of the machine to the standard
default configuration. By pressing both arrows, you will be asked if we are
sure of returning to all the default parameters and we will select between
the “OK or MENU” options. In case of selecting OK, all the default options
will be applied and you will return to the Configuration Menu and in case of
pressing MENU, we will go out of this opting without making any change.
Default Values
Sp R
t
-4
Sp max time
60m
Sp min time
4m
Manufacturing time
22m
Start-up time
30seg
Removal time
1m30seg