SPECIALLY
THOSE
RELATED
TO
CLEANING
AND
MAINTENANCE
OPERATIONS, which should be performed mostly by qualified personnel only.
DESCRIPTION
The most significant characteristics are:
•
18/8 Stainless steel bodywork
•
Telescopic guides for maintenance
•
Anti-lock injectors.
•
Pump without seals.
•
R134A refrigerants
•
Safety pressure switch in High
•
TRANSPARENT ICE CUBES mainly with water network.
OPERATION PRINCIPLE
WHEN STARTING UP THE MACHINE FOR THE FIRST TIME, IT WILL BE IN
THE WATER REMOVAL-INLET CYCLE.
In this moment, the compressor is functioning and the water and gas inlet valves
are opened. The necessary water amount is loaded for the manufacturing of the
next ice cycle and the excess goes to the drainage through the maximum level
overflow tank.
Once the specified time goes by, the hot gas and water entry valves close. The
pump starts and sends water through the injectors against the molds of the cubes,
where the ice is formed little by little. At the same time, the evaporation
temperature decreases until the cubes are completely made. When this period of
time goes by, the removal cycle starts (1.5-2 minutes). Now, the pump is stopped
and the hot gas and water entry valves are activated.
Once the removal cycle has ended, the machine starts producing ice until the
storage is full. This is when the stop order will be given.
With the purpose of not having non-terminated ice cubes, if when the stock
thermostat detects that the storage bin is full, and the cycle is already started, it will
end it.
