V
05/11
24
Initial start-up
OptiFlex 2 B
8. Setting the total air volume
correct powder cloud
too little total air
Note:
A total air volume of 4 Nm³/h and a 50% powder share are
recommended as the base values.
9. Adjust the powder output volume (e.g. according to the desired
coating thickness)
or
much powder
little powder
Note:
To achieve maximum efficiency, we recommend avoided an overly
high powder volume where possible! Für den Anfang empfiehlt sich
die Standardeinstellung von 50% und eine Gesamtluftmenge von 4
Nm³/h. Die Gesamtluftmenge wird dabei automatisch von der
Steuerung konstant gehalten
If values are entered that the equipment cannot implement, then the
operator is informed of this by a blinking in the relevant display and
a temporary error message!
Summary of Contents for OptiFlex 2 B
Page 12: ......
Page 31: ...V 05 11 OptiFlex 2 B Initial start up 29 24 25 26 27 28 29 30 31 32 33 34 ...
Page 36: ......