V
05/10
OptiFlex B manual coating equipment
General safety regulations
3
General safety regulations
This chapter sets out the fundamental safety regulations that must be fol-
lowed by the user and third parties using the OptiFlex B manual coating
equipment.
These safety regulations must be read and understood before the OptiF-
lex B manual coating equipment is used.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the ITW Ge-
ma operating instructions. The general safety precautions must also be
followed as well as the regulations in the operating instructions.
DANGER!
Danger due to live electricity or moving parts. Possible consequences:
Death or serious injury
WARNING!
Improper use of the equipment could damage the machine or cause it to
malfunction. Possible consequences: minor injuries or damage to equip-
ment
INFORMATION!
Useful tips and other information
Conformity of use
1. The OptiFlex B manual coating equipment is built to the latest
specification and conforms to the recognized technical safety
regulations. It is designed for the normal application of powder
coating.
2. Any other use is considered as non-conform. The manufacturer
is not responsible for damage resulting from improper use of this
equipment; the end-user alone is responsible. If the OptiFlex B
manual coating equipment is to be used for other purposes or
other substances outside of our guidelines then ITW Gema
GmbH should be consulted.
3. Observance of the operating, service and maintenance instruc-
tions specified by the manufacturer is also part of conformity of