OM-2245 / Operation and Maintenance Manual
ITWGSE 400 / Model ACE4400 / 400 Hz. Generator Set
March 15, 2015
Chapter 4-1
Page 2
All part numbers appearing in this column are ITW GSE numbers. In all instances where the part
is a purchased item, the vendor’s identifying five-digit code and his part number will appear in the
NOMENCLATURE” column. Vendor parts, which are modified by ITE GSE, will be identified as
such in the “NOMENCLATURE” column. In case Hobart does not have an identifying part number
for a purchased part, the “ITW GSE PART NUMBER” column will reflect “No Number” and the
vendor’s number if applicable will be shown in the “NOMENCLATURE” column. Parts
manufactured by ITW GSE will reflect no vendor or part number in the “NOMENCLATURE”
column.
(3) NOMENCLATURE Column
The item-identifying name appears in this column. The indenture method is used to indicate item
relationship. Thus, components of an assembly are listed directly below the assembly and
indented one space. Vendor codes and part numbers for purchased parts are also listed in this
column when applicable. Hobart modification to vendor items is also noted in this column.
(4) EFF (Effective) Column
This column is used to indicate the applicability of parts to different models of equipment. When
more than one model of equipment is covered by a parts list, there are some parts that are used
on only one model. This column is used for insertion of a code letter A, B, etc., to indicate these
parts and to identify the particular model they are used on.
Part
Code
Part Number
Output
Model
Description
CE
Certified
A 293105 400Hz
Single
Output --
B
293095
400Hz plus 28VDC
Single Output
--
C 293096
400Hz
Dual
Output --
D
293097
400Hz plus 28VDC
Dual Output
Yes
If the EFF column is blank, that part is used on all models.
(5) QTY. Column.
This column indicates the quantity of parts required for an assembly or subassembly in which the
part appears. This column does not necessarily reflect the total used in the complete end item.
