INFORMATION FOR OPERATORS
5
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 5 -
1.
Intended use
Original instructions. This device is intended for professional use. The use of the appliance treated in this docu-
ment must be considered "Proper Use" if used for cooking or regeneration of goods intended for alimentary
use; any other use is to be considered "Improper use" and therefore dangerous. The appliance must be used
according to the foreseen conditions stated in the contract within the prescribed capacity limits mentioned in the
respective paragraphs.
These appliances are intended for commercial activities (e.g. restaurant kitchens, canteens etc) and in commer-
cial companies (e.g. bakeries etc.) but not for the continuous food production.
Only use original accessories and spare parts supplied by the manufacturer to maintain regulatory
compliance.
Allowed operational and environmental conditions
The appliance has been designed to operate only inside rooms within the prescribed technical and capacity
limits. The following indications must be observed in order to attain ideal operation and safe work conditions.
The appliance must be installed in a suitable place, namely, one which allows normal running, routine and ex-
traordinary maintenance operations. The operating area for maintenance must be set up in such a way that the
safety of the operator is not endangered.
The room must also be provided with the features required for installation, such as:
•
maximum relative humidity: 80%;
•
minimum cooling water temperature > + 10 °C;
•
the floor must be anti-slip, and the positioned appliance must lay perfectly flat;
•
the room must be equipped with a ventilation system and lighting as prescribed by standards in force in the
country of the user;
•
the room must be set up for draining grey water, and must have switches and gate valves which cut all types
of supply upstream the appliance when needed;
•
The walls/surfaces around the appliance must be fireproof and/or insulated against possible heat sources.
Test inspection and warranty
Testing
: the equipment has been tested by the manufacturer during the assembly stages at the site of the
production plant. All certificates related to the testing performed will be delivered to the customer upon request.
Guarantee: the warranty is 12 months from the date of invoicing of the equipment, this period cannot
be extended.
It covers the faulty parts only. Carriage and installation charges are for the buyer’s account.
Electric components, accessories as well as other removable parts are not covered by the guarantee. Labor
costs relating to the intervention of authorized by the manufacturer at the customer’s premises, for removal of
defects under warranty are charged to the dealer. Excluded are all tools and supplies, possibly supplied by the
manufacturer together with the machines. Damage occurred in transit or due to incorrect installation or main-
tenance can’t be considered. Guarantee is not transferable and replacement of parts and appliance is at the
final discretion of our company. The Manufacturer is responsible for the equipment in its original configuration
and only for original spare parts replacement. The manufacturer declines all responsibility for improper use,
for damages caused as a result of operations not covered in this manual or not authorized in advance by the
manufacturer.
The warranty terminates in case of:
• Damage caused by transport “ex works” (EXW) and / or by handling, should this event occur, the customer
must inform the retailer and the carrier (eg. via e-mail and / or website) and write down on the copies of the
transport documents what It’s happened. The technician authorized to install the appliance will evaluate the
damage and decide if the installation can be carried out. The warranty also terminates in the presence of: •
Damage caused by incorrect installation. / • Damage caused by parts worn due to improper use. /• Damage
caused by use of non-original spare parts. / • Damage caused by incorrect maintenance and/or lack of mainte-
nance. / • Damage caused by failure to comply with the procedures described in this document.
Authorisation
Authorisation refers to the permission to operate an activity intrinsic to the appliance.
Authorisation is given to anyone who is responsible for the appliance (manufacturer, purchaser, signer, dealer
and/or location owner).
