19
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 19 -
MAINTENANCE
6.
FAULT
POSSIBLE CAUSE
OPERATION
The appliance does not turn on.
•
The master switch is not con-
nected.
•
The residual current device or
circuit breaker has tripped.
•
Connect the master switch.
•
Restore the residual current
device and/or circuit breaker.
The inner walls of the tank are
covered with limestone.
The water is too hard; the sof-
tener is finished.
•
Connect the appliance to a
water softener.
•
Regenerate the water sof-
tener.
•
Descale the cooking compart-
ment.
The cooking compartment is
stained.
•
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
Filter the water (see water sof-
tener).
•
Use the recommended deter-
gent.
•
Rinse once again.
The light indicators do not turn
on.
•
The master switch is not con-
nected.
•
The residual current device or
circuit breaker has tripped
•
Connect the master switch
•
Restore the residual current
device and/or circuit breaker
Troubleshooting
Notes! Whenever the appliance does not work properly, try to solve the less serious
problems using this table.
Notes! If the problem cannot be resolved, turn the appliance off, and shut all the
supply valves. Then contact authorized customer service.
