ORBIMAT CA
| Operating instructions
Operation
(09.03.15) OW_ORBIMAT_CA_BA_871060202_04_EN
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Tel. +49 (0) 77 31 792-0
55
2. Press button for desired copy direction.
3. Press button for data to be copied (e.g. "
A procedure
from a folder
").
4. Select and copy element (e.g. procedure).
Fig. 29:
Copy functions
8.10.2
Entering comments and application data ("Process details")
Useful information on individual parameters (material, gas type, electrode etc.) and comments (e.g. a description of the
seam preparation, an angle setting of the electrode with adapter) about a procedure can be entered for the operator. This
information may be required for ensuring consistent results while running the procedure.
Entering notes and comments
1. In the main menu, select "
System settings
" > "
Program settings
" > "
Process details
".
A list for entering process-relevant, "non-electrical" parameters appears in the display.
2. Enter notes on the parameters in the corresponding fields and save them.
To enter other information:
3. Press "
Comment
" button
The comment field appears in the display.
Fig. 30:
Process details
Fig. 31:
Comments
4. Highlight input field, enter text and save.
