Typhoon_UM_9752903010_NL_D_GB_F_V2_1
45
F
5.4. Ventilateur (option)
Lire la notice d'utilisation du ventilateur.
5.4.1. Généralités
Contrôle
Contrôler avant de connecter le ventilateur :
s'il n'y a pas d'objet dans le ventilateur, tout objet sera expulsé avec une grande force du
ventilateur.
si le boîtier n'est pas endommagé ou déformé, ce qui va au détriment des performances de
l'appareil.
Sécurité
- L'installation électrique et l'entretien doivent toujours être réalisés par un
électricien qualifié.
L'installation électrique et le câblage doivent être adaptés au ventilateur prévu.
- Le ventilateur peut être monté dans la position souhaitée, utiliser à cet effet les
points de montage prévus sur le ventilateur.
- Monter le ventilateur de manière à ce que le courant de refroidissement du moteur ne
soit pas entravé, la température ambiante maximale est de 40 °C.
Avant de connecter le ventilateur, lire les instructions fournies avec le moteur électrique.
5.4.2. Installation
Prévoir un sectionneur de protection de moteur comme protection thermique du ventilateur.
Le ventilateur doit de préférence être fixé.
Les fusibles dans le circuit électrique doivent être suffisamment grands : environ 2,5 fois le
courant nominal avec une commutation étoile-triangle, environ 6 fois le courant nominal
avec un démarrage direct sur le réseau secteur.
La manière de mettre l'appareil en et hors circuit dépend de l'utilisateur.
Lire à ce sujet les instructions fournies avec le moteur électrique.
6. Mise en service
Mettre le ventilateur en circuit.
Mettre l'appareil d'alimentation de la barre antistatique en circuit ou mettre la tension pour
la barre P-SH-N-Ex en circuit.