23
Wi-Fi
- Connecting to other devices
Advanced Setting
Using the iui DESIGN Wi-Fi Audio App, you can control the advanced setting
of IMMERSE and other iui DESIGN Wi-Fi speakers, including “Rename Your
Speaker”, “Multi-Room”, “Audio Channel” and “Firmware Update”.
For multi-room setting, see the section “Multi-Room” for detailed instructions.
For firmware update, see the section “Firmware Update” for detailed
instructions.
Reset Wi-Fi Connection
If you wish to connect IMMERSE to another Wi-Fi network or you could not
find IMMERSE in the list of available wireless networks in Wi-Fi setting page,
you need to reset the Wi-Fi connection. After restoring the factory setting, the
name of speaker will be set as “IMMERSExxxx”.
To reset the Wi-Fi connection, follow the below instructions:
1. Connect IMMERSE to power source. Select “WIFI/LAN” as the audio source.
2. Press and hold key for 5 seconds. The LED indicator will flash red
with alert tone to indicate that the factory reset is done.
* The Factory Reset only applies to Wi-Fi mode with no 3.5mm line-in
connected. If you want to reset to the factory default, please disconnect the
3.5mm audio line in cable.
