Page 13 (52)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Flex
4 LIFT THE UNIT
00189
Art. Nr. 19194-0013
Follow the lifting and assembly instructions in this manual.
Use lifting equipment where available.
Use appropriate protective equipment.
Exercise caution when working between unit parts.
Exercise caution when placing unit parts on the support.
Use the support to secure the parts against possible tipping risk.
•
•
•
•
•
•
High unit parts, as well as unit parts with a high or offset centre of gravity,
mean a greater risk of tipping.
Risk of life-threatening or serious crushing or compression
injury.
WARNING!
00179
Follow the lifting and assembly instructions in this manual.
Use lifting equipment where available.
Use appropriate protective equipment.
•
•
•
The unit parts are often heavy and cannot be lifted by hand. See weights
indicated on the layout drawing.
Risk of life-threatening or serious crushing or compression
injury.
WARNING!
00180
Follow the instructions for lifting in this manual.
Never exceed the specified weight for the respective lifting method or
lifting equipment.
Slide stops must be fitted when lifting, if bracket is used.
Replace used T-bolts and nuts with new ones after each lift.
•
•
•
•
A falling unit when lifting can cause crushing injuries.
Risk of serious crushing injury.
WARNING!
00186
Use spreader bars when lifting with bracket.
Follow instructions for working with spreader bars.
•
•
Chains/straps that are lying against the unit when lifting may damage the unit.
Risk of damage to the product
CAUTION!