Page 6 (52)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Flex
ivprodukt.docfactory.com
Order Portal
1 SAFETY
This section addresses important safety aspects of assembly, with the aim of raising safety
awareness and avoiding personal injuries and damage to surroundings and units.
00177
This manual contains important instructions. Read it carefully and follow
the instructions.
Pay special attention to warning and information messages, as well as
markings on the product.
Keep the manual for future use.
•
•
•
1.1
Intended use
Intended use
The product is intended to be used Air handling unit for comfort ventilation in properties.
Intended users
The contents of this manual are intended for personnel assembling the unit on site.
Intended user environment
• The unit is usually placed indoors, but is also available as an outdoor version.
• When installed indoors, the unit must be installed in a ventilated area that maintains a
temperature b7 and +30 °C, and that maintains a moisture content of <3.5 g/kg in
dry air in the winter.
• The unit can also be equipped for assembly in cold attics.
Unintended use
Any use other than specified in Intended use is prohibited unless specifically permitted by IV
Produkt. It is not permitted to use the unit in potentially explosive environments.
1.2
General safety
Failure to comply with the safety precautions may result in injury to persons or damage to air
handling units. To avoid personal injuries and damage to surroundings or units:
• Follow national and local laws/regulations for safe work, e.g. fall protection when working
at a height.
• Do not wear loose clothing or jewellery that may get stuck.
• Do not step or climb on the unit.
• Use appropriate tools.
• Use appropriate personal protective equipment.
• Note the unit’s markings: product signs, information and warning stickers.
Personal protective equipment
Personal protective equipment must always be used based on the risks present in the work-
place. For example, wear protective shoes with steel toecaps, hearing protection, protective
helmet, gloves, safety glasses or goggles, fully-covering clothing, safety overalls, mouth-
guard/protective mask and/or fall protection where the work and work environment requires it.
