Receiver
Front panel
1 – Antenna A
4 – LCD
2 – Power Switch
5 – Volume Control B
3 – Volume Control A
6 – Antenna B
Rear Panel
1 – Balance Audio Output A
3 – Balance Audio Output B
2 – Unbalance Audio Output
4 – DC Power Jack
Transmitter
1 – Cartridge Module
4 – Battery Cover
2 – Operating Indicator
5 – Transmission Antenna
3 – Power Switch
6 – Clip
Note: When the operating indicator lights up red, it means that the
battery is low. When it light up green, it means that the battery is good.
When there is no light, it means the microphone is off.
Operation:
1.
Install batteries
2.
Turn on microphones by pushing the switch towards the ON
position
3.
After you are done singing/talking, push the switch to the OFF
position
4.
If you are not going to use the microphone for long period of
time, turn off the microphone and pull out the batteries to
avoid deterioration and damage towards the components
