4
IVC US
Details & Definitions of Commercial Warranties
Warranties as defined below ensure that your IVC US floor will perform properly for the stated warranty period
when installed in accordance with IVC US Commercial Installation Guide - Laminate PressXpress &
DropXpress over approved substrates and underlayments and using the recommended sealers/sealants (if
applicable) with proper care and maintenance under normal circumstances.
Manufacturing Defects Warranty
ensures that your floor will be free of manufacturing defects.
Click Connection Integrity Warranty
ensures that your floor’s locking system will remain connected and
preserved.
Household Stain Resistant Warranty
ensures that your floor will not permanently stain from common
household products, excluding permanent marker, permanent dyes & finishing stains.
Fade Resistance Warranty
ensures your floor will resist fading over time*.
Wear Resistance Warranty
ensures your floor will not wear through the wear layer under normal household
conditions and proper maintenance**.
* Laminate is fade resistant, not 100% fade proof. It is generally accepted that all gloss finishes (i.e. paint, glass, furniture
or car surfaces, etc.) are susceptible to superficial fading/gloss variation. This is not considered as a product fault.
** Wear-through is defined as complete loss of the wear layer so that the printed pattern or design is altered. Gloss
reduction is not considered wear and is not covered by this warranty. In addition, in the event of V-Groove (beveled
edge), the reduced resistance of the V-Groove specifically is not included in the warranty.
This document is reviewed on an ongoing basis
MKF_0028_2 10/28/15
