!
As of example LCD display might show 48 or any other value depending on the pressure.
Keep lifting and lowering forks and that value should change accordingly. If sensor value is not changing check electrical
connections to correct the problem with electrical connections of the pressure transducer 3 wires or you must replace
pressure transducer.
Press
⬅
key to complete pressure transducer checking procedure.
Lift truck equipped with hydraulic accumulators
If the standard SkidWeigh system is installed on the lift trucks equipped with hydraulic accumulators, please contact us
to provide you with different digital indicator having specific software algorithm to obtain load weight accuracy /-
1% of vehicle maximum lifting capacity.
Date / Time Set Up
In the event that date and time is not right you can correct when you press
F
key and hold it for the moment until LCD
display shows
ENTER FUNCTION
Press number
3
and display will be in date / time change mode.
Use left
◀
and right
▶
arrow key
(bottom left side of the keypad)
to change the
value. Press
“Enter key”
↵
(bottom right side keypad arrow
) to confirm the
setting. The cursor will automatically move to the next item to be changed ( Month,
Day, Year, Hours, Minutes, Seconds). On the last correction, seconds item press
“Enter key”
↵
to confirm new date / time set up.
LCD Display
⬅
KEY TO EXIT
SENSOR = 48
LCD Display
AUG 28, 2010
12:20:23
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
