!
Operator Usage Guide
Turn on ignition switch
(Vehicle operation is disabled until valid RFID card is used)
Scan valid operator RFID card
LCD display will show date and time or
LCD message prompts the operator to complete OSHA safety check procedure
before vehicle operation is enabled.
Default values for all OSHA
“safety check’s messages”
shown on the LCD Display are
F
meaning
Fail
.
Press
“Enter key”
↵
to confirm if the
F
(Fail) if true.
To change
F
(Fail) to
P
(Pass) press left or right arrow key. The LCD will change to
P
and press
“Enter key”
↵
to confirm selection.
System will automatically advance to next OSHA
“safety check message”
.
Follow above procedure for all next OSHA
“safety check messages”
by inputing the
F
or
P
.
After the last
“safety check message”
input (
F
or
P
) is done the LCD display will go back and
show date / time and
vehicle operation will be enabled
.
LCD Display
IVDT
SCAN CARD
LCD Display
SAFETY / CHECK
LEAKS/DAMAGE?F
LCD Display
Aug 28, 2010
12:20:23
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
