HEATING SYSTEM / AIR CONDITIONING
The heating system can be used to control the interior temperatures of the
vehicle. To use these functions, the engine must be switched on.
To activate the system, press the power button (1).
Air conditioner
(point 1 to 8)
1. switch on button
2. change display mode
temperature display (7)
driver area / passenger
area / set temperature
3. change mode (automatic
/ cool / heat)
4. change fan speed (au-
tomatic / high / medium
/ low)
5. change ventilation mode
(automatic / fresh air /
recirculated air)
6. input error display
yellow: Inputs are not
valid (temperatures
selected too low or too
high)
red: Internal error
7. temperature display
In case of error: Ht =
temperature too high / Fr
= temperature too low
8. temperature selection
(range 17 to 27 degrees
Celsius)
9. odometer (time, speed,
distance)
10. FM radio - click on left
button for on/off
Heating in the driver‘s area
(point 11 to 14)
11. fan speed
12. heating position
13. temperature selection
14. fresh air /
recirculated air
15. open front door
(upwards) / close
(downwards)
16. Back door open / close
1. numeric keypad
2. arrow keys stop selection
(up next / down previous
stop)
3. change between
automatic and manual
announcement
4. no function
5. route
6. line
7. play next stop
8. destination
9. no function
10. enter
IBIS MATRIX CONTROLLER
The internal and external bus displays are configured and controlled via the
matrix controller. For example, the selected destination can be seen on the
outside of the bus
7
8
9
10
11
12
13
14
15
16
6
1
1
2
3
5
4
6
8
7
9
10
2
3
4
5
18
19
