3
4. Install Euro Cylinder & Pull Handles
4.1. Insert euro cylinder through door and fasten with
fixing bolt through door edge.
(8)
(7)
4.2. Insert pulls on either side of the door.
(10)
(1)
4.3. Insert tie bolt and cut to size as necessary.
4.4. Install pulls securing them with tie bolts.
(10)
5.1. At the appropriate height, and as per the template,
create two W19mm x H47mm cavities in the door
frame to accommodate the strike.
plate and dust box to a minimum depth of 28mm.
5. Install Dust Box & Strike Plate
(2)
5.2. Insert dust box and strike and mark around the
edges of the strike plate with a stanley knife.
5.3. Using your preferred method create a 4.5mm
recess to accommodate the strike plate.
5.4. Insert dust box and strike plate and affix with
provided screws.
5.5. Test that the unit latch works.
(3)
(2)
(9)
6.1. Mark the edge of your door at the desired height
of your edge pull.
6. Install Edge Pull – Marking the Door
Preferred product height
