Charge the Battery
Use Touch Screen
Remove Memory Card, SIM Card and Battery
Attention: Do not bend or scratch SIM card, do not let it contact with static
electricity, dust or water.
Keep all SIM cards where children cannot reach or touch.
Note: Keep the SIM card chip contacts face downward. Make the SIM card fits
card slot.
Note: If the phone is turned on, long press Power Key about 3 seconds until it
tips phone options and select Power off and then press OK to turn off the
phone. Then, remove the battery, SIM card and memory card.
Do not plug or remove memory card in boot state, otherwise it will cause
damage to the file system.
1. Before charging, check the battery slot to ensure the battery has been
installed correctly.
2. Plug one end of the charger into phone.
3. Connect another end of the charger to the socket.
4. Start charging. It can be charged whether powering on or powering off.
In power off state, the battery icon on screen start rolling means it is being
charged. When the icon is full and stop rolling means charge is completed.
5. Unplug the charger from the socket.
6. Disconnect the charger and phone.
Press: Use finger to press the desired option to confirm selection or start an
application.
Long press: Long press the screen in current operation interface, icon, or
input area; you can open the option menu in current interface.
Slide: Slide the finger on screen horizontally or vertically. For example, slide
7
▲
▲
▲