iVina BulletScan F200 Quick Install Guide
Rev. 4 Aug 2010
3
Software Installation
Make sure no other programs or applications are running when installing the
scanner software.
Insert the scanner software CD into your computer's CD drive.
The software installation menu should launch, asking you for which type of
installation to perform.
Select "Easy Install" from the menu to have all of the standard software installed
automatically for you.
If you're using Windows Vista with User Access Control enabled, you may see a
window pop up. Click the "Allow" option.
When your computer finishes installing the software and driver, you can then
connect and power on your scanner (see next page).
If the installation menu doesn't open automatically, you'll need to open "My
Computer" (on Windows XP/2000) or "Computer" (on Windows Vista/7). From
there double-click the "ScannerDrivers" icon and the menu should open.
If you do not have a drive that can read CD-ROM discs, the driver for your scanner
is available at www.bulletscan.com
The additional software provided with your scanner is only licensed for distribution
via CD, and is only licensed for the computer that the BulletScan scanner is
attached to.
