[EFH-2000C; EFH-3000C; EFH-3000C2; EFH-5000C;
EFH-15000C]
0 > OFF
> FAN
> LOW HEAT
> HIGH HEAT
[EFH-9000C]
0 > OFF
> FAN
> LOW HEAT
> HIGH HEAT
Once the room reaches the required temperature,
heating element will stop working, but fan also working
still. Once the temperature decreased, the heating
element will be working again. The machine starts and
stop automatically and thus keep the room temperature
constant.
∙
Before turn off the machine, turn the thermostat
knob (3) to OFF position and turn the switch knob (2) to
FAN or 0, let the appliance cool down for two minutes.
MAINTENANCE AND STORAGE
Before any work on the device itself,
pull the mains plug.
∙
Always keep the tool and the ventilation slots (if
present) cleaned. Regular cleaning and maintenance of
the appliance will ensure efficiency and prolong the life
of your tool.
∙
If the tool should fail despite the rigorous
manufacturing and testing procedures, the repair should
be carried out by an authorized IVT customer service.
∙
Keep all nuts, bolts, and screws tight, to be sure the
tool is in safe working condition.
∙
Replace worn or damaged parts for safety.
∙
Use only original spare parts. Parts not produced
by manufacturer may cause poor fit and possible injury.
∙
Store the tool in a dry room out of reach of kids and
away from any flammable material.
∙
Never wet the device or spray water on it!
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Machine, accessories and packaging should be sorted
for environment-friendly recycling.
The plastic components are labelled for categorized
recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
9
EN
Instruction manual
Summary of Contents for EFH-15000C
Page 5: ... F1 EFH 2000C EFH 3000C EFH 3000C2 EFH 5000C EFH 15000C EFH 9000C C 3 2 MAX MIN C 3 2 5 ...
Page 42: ......
Page 43: ......