8
Manual instruction
EN
Safety regulation for the use
General safety rules
This model of low speed drill (LD-500) is intended
for mixing liquids, paints, glues and others liquid
building materials.
The following listed safety instructions should
serve you for the right use and for the protection
of your own safety. Therefore please read this very
carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature
supplied with your tool for any future reference.
Comply with the safety information and the
warnings on the tool.
Be familiar with the controls and the proper use of
the tool before attempting to use it and above all,
make sure you know how to stop to use it in case
of emergency.
Following these simple instructions will also
maintain your tool in good working order.
• The tool must be assembled correctly before use.
• Only use the tool for its designed purposes.
• In addition to the design of the tool there may
be safety decals that must be considered and
indications about the safety equipment to use.
The prevention of accidents is dependent upon
the awareness, common sense and proper training
of everyone involved in the operation, transport,
maintenance and storage of the tool.
• Never leave the tool unattended.
• Never allow children to use the tool. Children
should be supervised to ensure that they do not
play with the tool.
• Keep children and pets away. All onlookers
should be kept at a safe distance away from the tool
when it is in use.
• The user is responsible for third parties while
working with the tool .
• People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and
people under the influence of alcohol, drugs or
medication are not allowed to use the tool . Local
regulations may restrict the age of the operator.
WARNING: The consumption of alcohol,
medication and drugs, plus states of
illness, fever and fatigue will affect your
ability to react. Do not use this tool in any of these
situations.
• Make sure that all the protective devices (if
present) are fitted and are in good condition.
Tool specification
model
LD-500
Voltage/Frequency [V~Hz]
230~50
Rated power [W]
500
No-load speed [RPM]
0-800
Max. torque [Nm]
88
Max. chuck diameter [mm]
13
Sound pressure level [dB(A)]
82.4
Sound power level [dB(A)]
93.4
Vibration level [m/s
2
]
10.2
K [dB]
3
Weight [Kg]
2.3
Safety class
II
Symbols
Summary of Contents for LD-500
