7
ASSEMBLE
Your treadmill is preassembled, just follow these steps to start use:
Place the treadmill in a cleared area and remove all packing tools.
1. Lift the main bars so that they remain of vertical and place
the locking pin (A) as shown in Fig 1. (turn knob clockwise).
2. Place the folding pin (B) as shown in the Figure 1. This
serves to hold the main bar.
3. Place the handlebars in the main bar inserting the screws
(C) with the help of the Allen wrench (H). Connect the cable
from the computer and finally place the plastic covers (D) to
cover the screws.
4. Lock the computer (E) between the handle and the hole
orificiodel computer.
5. Place the emergency key (G) in the magnetic part of the
computer.
(figure 1)
Summary of Contents for E318 W
Page 10: ...PARTS AND HOW TO USE E318 W...
Page 16: ...COMPLETE MANUAL E318 W...
