c. Screw the airhose onto the
Pistol Grip Filter.
(finger tighten only)
d. Screw the airhose onto the
compressor.
e. Press down on the trigger before
turning on the unit.
f. Plug the unit into a grounded wall
outlet.
Turn ON the unit by pressing the
top side of the switch.
Adjust the air pressure by turning
the air adjustment knob to the
desired pressure.
g. As the unit is being used, water may
collect in the Pistol Grip Filter.
Release the water by pushing
up on the release valve with your
finger and a paper towel.
