Releasing Built Up Moisture
•
Release the water by twisting the dial toward the – sign.
•
This will open the bleed valve and drain off the collected moisture.
•
Hold a paper towel under the open valve to collect the water.
•
Do not let excess water build up in the moisture trap.
Changing The Air Filter
The filter only needs to be changed if it’s significantly dirty or dirty enough to cut air flow into the compressor.
•
Use your finger to pull the black tab out
•
Pull out the sponge-like air-filter
•
Replace with new air filter (Part # IS 030 – 10 pack)
•
Please inspect your air filter once per week with heavy compressor use.
DO NOT use oil in/on the compressor.
MAINTENANCE
7
1. Release any built up moisture.
2. Turn off the compressor.
3. Release any leftover air.
For any other problems or issues call or contact Iwata-Medea at 503-253-7308 or email us at: info@medea-artool.com.
ENDING A SESSION
Summary of Contents for IS-800
Page 2: ......
Page 3: ...ASSEMBLY INSTRUCTIONS 3...
