background image

WARRANTY

All Iwata compressors are 

Warranted

 against all manufacturing defects of material and manufacture or workmanship for a period of ONE year 

from the date of purchase*. This warranty does not cover intake air filters as periodic replacement of these parts is REQUIRED due to normal wear. 

Any part or material that is or becomes defective so as not to be usable within this period will be repaired or replaced.  This warranty does not cover 

damage caused by negligence or a compressor that has been altered or abused in any way.  

Call or email Anest Iwata-Medea before returning a compressor for the appropriate procedure for warranty repairs.  Any material that is shipped 

to Anest Iwata-Medea without prior authorization will not be accepted.

• 

Anest Iwata-Medea offers technical support over the phone at no charge. 

Call Customer Care at 503-253-7308 Monday – Friday, 

 

8am – 4:30pm Pacific Time.

 Telephone support includes general usage information, cleaning tips, and troubleshooting. 

• 

NOTE: 

All compressors returned for repair must have a Return Authorization Number. Please call 503-253-7308 to obtain an RA number,  

 

instructions and shipping address.

Warranty service will be provided only at authorized Anest Iwata-Medea service centers.  You must pay all charges for shipping/transporting your  

Iwata Studio Series Compressor to/from these service facilities.  

Anest Iwata-Medea, Inc. will not be responsible for damage to persons or property, commercial loss or any other incidental or consequential damage 

caused by a defective compressor. However, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above  

limitations may not apply to you. 

All implied warranties, including any warranty of merchantability or fitness are limited to the duration of this written warranty.  However, some states  

do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

* Please keep the sales receipt.

Genuine Iwata

©2016 Anest Iwata-Medea, Inc. All rights reserved. The Anest Iwata-Medea logo, Anest Iwata-Medea and Iwata Studio Series are registered trademarks of Anest Iwata-Medea, Inc. Iwata Custom Micron, Iwata Hi-Line and Iwata Eclipse are trademarks of ANEST IWATA 

Corporation. Iwata, the Iwata logo and NEO for Iwata are registered trademarks of ANEST IWATA Corporation. All other trademarks are the properties of their respective owners.

Summary of Contents for IS-875HT













Reviews: