Iwata IS-875HT, Owner'S Manual

The Carry Handle Is The Air Storage Tank

Oil-Less Piston Compressor

Oil-less means oil-less. The compressor uses PTFE gaskets to seal the compression chamber.  This allows the compressor to be quiet without 

atomizing oil into the air stream, which makes the compressor virtually maintenance free.

Air Pressure Adjustment Knob  

Though not a full regulator, the air pressure adjustment knob allows control of the air pressure.  It also doubles as the moisture release valve.

Moisture Trap Assembly

The moisture trap filters out the water and debris down to 5 microns.

Air Pressure Gauge

Don’t guess what pressure you’re spraying at — know it!  Your “working pressure” (or “working psi”) is what the gauge shows while you have  

your trigger pressed down.

Power Switch

You don’t have to unplug the compressor when you want it to stop, just flip the switch.

Thermal Overload Switch

If the compressor ever decides to overheat, the Thermal Overload Switch will turn off your compressor.  If this switch cuts in, it’s saving your  

compressor.  Let it cool down.  The switch will automatically reset itself.

Voltage

If you bought the compressor in the country you’re going to use it, it’s completely ready to go.  If you’re going to transfer the compressor to  

another country with a different voltage, you’ll need a plug adapter and the appropriate power converter. WARNING: Using a plug adapter  

and power converter may cause unit to overheat. Any issues resulting from the use of a power adapter and/or power converter are  

not covered under the Anest Iwata-Medea warranty.

FEATURES

4