4
GETTING STARTED
1. Unpack the compressor and all packaged components. Enclosed you’ll find:
a. Ninja Jet Compressor (#IS-35)
b. Coiled Air Hose
c. Adapter Kit (for other brands of airbrushes)
d. Ninja Jet Manual
2. Screw the airhose onto the airbrush.
a. If you’re using a brand of airbrush other than Iwata, use the appropriate adapter from the Adapter Kit. You might have to try them
out to see which one is right.
3. Screw the airhose onto the compressor.
a. Other brands of airbrush hoses will fit the compressor. (Compressor has standard 1/4” threads)
4. Press down on the airbrush trigger before turning on the unit.
5. Plug the unit into a grounded wall outlet. Avoid using an extension cord.
6. Turn ON the unit by pressing the on/off switch. The on/off switch is located on the back of the unit. Adjust the air pressure by turning the air
adjustment knob. Turn knob to increase pressure and toward - to decrease pressure. Max pressure on the Ninja Jet is 18 psi.