background image

WARRANTY

All Iwata compressors are 

Warranted

 against all manufacturing defects of material and manufacture or workmanship for a period of ONE year 

from the date of purchase*.  Any part or material that is or becomes defective so as not to be usable within this period will be repaired or replaced.  

This warranty does not cover damage caused by negligence or a compressor that has been altered or abused in any way.  

Call or email Iwata-Medea before returning a compressor for the appropriate procedure for warranty repairs.  Any material that is shipped to  

Iwata-Medea without prior authorization will not be accepted.

• 

Telephone Technical Support: Iwata-Medea offers technical support over the phone at no charge. Telephone support includes general  

 

usage information, cleaning tips, and troubleshooting. 

• 

For Tech Support please call us at 503-253-7308 Pacific Time, 9am – 12pm & 1pm – 4pm, Monday – Friday 

• 

NOTE: All compressors returned for repair must have a Return Authorization Number. Please call 503-253-7308 to obtain an RA number,  

 

instructions, and our shipping address.

Warranty service will be provided only at authorized Iwata-Medea service centers.  You must pay all charges for shipping/transporting your  

Iwata Studio Series Compressor to/from these service facilities.  

Iwata-Medea, Inc will not be responsible for damage to persons or property, commercial loss or any other incidental or consequential damage caused 

by a defective compressor.   However, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above  

limitations may not apply to you. 

All implied warranties, including any warranty of merchantability or fitness are limited to the duration of this written warranty.  However, some states  

do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

* Please keep the sales receipt.

Genuine Iwata

Copyright © 2009 Iwata-Medea Inc. All rights reserved. The Iwata-Medea logo, Iwata-Medea®, Iwata Eclipse™, Iwata Revolution™, Iwata Kustom™, Iwata Micron™, Sprint Jet™, Smart Jet™, Power Jet Pro™, Power Jet Lite™, Medea Super Lube ™, Pistol Grip Filter™, and 

all products denoted with ® or ™ are registered trademarks or trademarks of Iwata-Medea Inc. • Iwata® and the Iwata logo are registered trademarks of Anest Iwata Japan. For more information visit www.iwata-medea.com

10

Summary of Contents for SMART JET IS-850












Reviews: