REL1.2
Page 13 of 62
RZ/G1E SODIMM SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
•
Power & Reset
General Specification
•
Power Supply
:
3.3V,3A
•
Form Factor
:
67.6mm x 37mm
¹ Since SDHI1 interface is shared between Wi-Fi/BT module and µSD Connector, either one only can be used at a time.
By default Wi-Fi/BT module is supported.
2
In RZ/G1E CPU, EtherMAC and VIN1 are multiplexed in same pins and so either one interface only can be used at a
time. By default, VIN1 camera interface is supported in RZ/G1E SODIMM SOM. iWave also supports separate RZ/G1E
SODIMM SOM with EtherMAC support instead of VIN1.
3
Since HSCIF2 interface TXD and RXD signals are shared between Wi-Fi/BT module and SODIMM Edge pins, either
one only can be used at a time. By default, Wi-Fi/BT module pins are supported.
4
Since SCIF5 interface is shared between Wi-Fi/BT module and SODIMM Edge pins, either one only can be used at a
time. By default, Edge pins are supported.
5
In RZ/G1E SODIMM SOM, VIN1 and MSIOF1 interface signals are connected to same pins of SODIMM Edge
connector (through isolating resistors) and so either one interface only can be used at a time. By default, VIN1
camera interface is supported on SODIMM Edge. In EtherMAC supported RZ/G1E SODIMM SOM, MSIOF1 (and some
extra GPIOs) is supported on SODIMM edge (instead of VIN1).
Summary of Contents for iW-RainboW-G22M
Page 49: ...REL1 2 Page 49 of 62 iWave Systems Technologies Pvt Ltd RZ G1E SODIMM SOM Hardware User Guide...
Page 50: ...REL1 2 Page 50 of 62 iWave Systems Technologies Pvt Ltd RZ G1E SODIMM SOM Hardware User Guide...
Page 51: ...REL1 2 Page 51 of 62 iWave Systems Technologies Pvt Ltd RZ G1E SODIMM SOM Hardware User Guide...
Page 62: ...REL1 2 Page 62 of 62 iWave Systems Technologies Pvt Ltd RZ G1E SODIMM SOM Hardware User Guide...